1″ PowerGrip Heat-Shrink Clamps
1″ PowerGrip Heat-shrink clamps. Gates thermoplastic clamp maintains a dynamic tension so that it never needs retightening. Whenever the engine reaches operating temperature, the shrink forces of PowerGrip SB readjust to a consistent clamping force. In addition, its clamping force increases as the temperature drops below 40 degrees F, thereby tightening the connection. Cold leaks, which normally occur when the temperature drops below 40 degrees F, are eliminated. Installation using a heat gun is fast and easy, including hard-to-reach places. Heat-gun attachments permit installation in confining areas that would be extremely difficult to reach using a screwdriver on conventional worm-drive screw clamps. The PowerGrip SB hose clamp features a smooth surface that won’t rust, corrode, or result in cut fingers during installation. PowerGrip SB hose clamps are completely resistant to all automotive fluids including oil, antifreeze and even brake fluid. Wider than conventional clamps, PowerGrip SB hose clamps can be positioned over the raised bead on the end of the fitting nipple – even cast metal. PowerGrip SB clamps are readily removed with Gates’ specially designed clamp removal tool. The clamps also can be removed using a soldering iron to melt through the thermoplastic material.